Feedback

Stagetab grows with its users: the bugs you report and the tools you ask for help decide what comes next.

The tool, version and browser are sent along so the bug can be reproduced. Your email only if you enter it.

Most requested tools

  1. Loading …

Click ▲ to vote. New requests appear after a short review.

← All tools

Hall 3D Model

Build a to-scale 3D model of the hall from a dimensioned floor plan and photos: walls, gates, windows, roof and exposed steel frames. Plan and check stage and seating: exits and capacity, view of the stage, reverberation, load-in route and aerial work platforms, sun position. Plus a venue fact sheet as PDF, a 3D link for clients and AR on your phone. Export as GLB or send it to the lighting and rigging planner with one click.

Loading Hall 3D …

About Stagetab

All calculations run locally in your browser. Nothing you enter is transmitted; run sheets and soundboard labels are stored on your device only.

The calculators provide guide values for planning and setup. Manufacturer data, on-site measurements and safety regulations always take precedence.

Need technical production for your event?

ES-Sound plans and runs sound, lighting and video for corporate events, concerts and celebrations.

Request a quote

Licences & trademarks

Terms of use

  1. Stagetab may be used free of charge for planning and running your own events, including commercially.
  2. Redistribution, sale, modification, reverse engineering and copying parts of the software into other products are not permitted. Stagetab is provided exclusively via es-sound.de.
  3. All calculations (e.g. loads, power, levels) are guide values and do not replace checks by competent personnel. The user or the responsible specialist on site is responsible for set-up, safety and sign-off.
  4. Stagetab is provided without warranty. ES-Sound is only liable for intent and gross negligence, as far as permitted by law.
  5. Project data stays in your browser or on your computer. Stagetab does not send any project data to ES-Sound.

Software, data and fonts

The ES-Sound Stagetab uses the following software, data and fonts. The full licence texts are included with the files.

ComponentRights holderLicence
three.js (3D rendering)three.js authorsMIT
systray (hardware bridge tray icon)Fyne.io project, GetlanternApache 2.0
godbus (hardware bridge on Linux)Georg Reinke and contributorsBSD 2-Clause
Go x/sys (hardware bridge on Windows)The Go AuthorsBSD 3-Clause
MapLibre GL JS (map in the site plan)MapLibre contributorsBSD 3-Clause
Map data in the site plan (only when a map is selected)OpenFreeMap, OpenMapTiles, OpenStreetMap contributorsODbL
PDF.js (PDF as floor plan)Mozilla FoundationApache 2.0
ONNX Runtime WebMicrosoft CorporationMIT
AI model “Beat This!” (beat tracking)Institute of Computational Perception, JKU Linz; Johannes GorsetMIT
Essentia models for mood detection (AI module only)Music Technology Group, Universitat Pompeu Fabra, BarcelonaCC BY-NC-SA 4.0
fft.jsFedor IndutnyMIT
Open Fixture Library (fixture data)Florian & Felix Edelmann and contributorsMIT
GDTF files from GDTF Share (Powered by GDTF)Manufacturers or users who uploaded the file; GDTF Share by MA Lighting, Robe and VectorworksTerms of use of gdtf-share.com; GDTF is DIN SPEC 15800
Fonts Barlow Condensed, IBM Plex Sans, JetBrains MonoJeremy Tribby; IBM Corp.; JetBrains s.r.o.SIL Open Font License 1.1
Windows app: Electron and ChromiumOpenJS Foundation, The Chromium AuthorsMIT and others, see program folder

GDTF and MVR are open formats according to DIN SPEC 15800. The lighting plot symbols follow the USITT recommendations (RP-2) and are our own drawings.

Trademarks

Product and company names mentioned, e.g. of fixture, truss and console manufacturers, are trademarks of their respective owners. They are used only to identify devices, formats and compatibility. The Stagetab is not affiliated with or endorsed by these manufacturers. Manufacturers' fixture files remain their property.

This tool builds a to-scale hall 3D model from a dimensioned floor plan and a few photos. Walls, gates, windows, roof and exposed steel frames take shape step by step. Then you download the model as GLB or send it to the lighting plot. The tool is free and runs in your browser without sign-up.

Hall 3D model with pitched roof and steel frames built from a floor plan and photos

Why a hall 3D model helps

Many venues have no 3D drawing, and often there is only an evacuation plan and phone photos. For lighting and rigging, however, the height under the roof frames is what counts. Therefore a simple model pays off from the first site visit. That way you check sightlines, trim heights and space for trusses early on.

From floor plan to hall

First, load an image of the floor plan. Alternatively, create a rectangular hall from length and width. Then add the outline, inner walls, columns, doors, gates and windows. For the roof, choose a pitched, mono-pitch or flat roof. You also set the frame spacing, frame width and the position of the first frame.

  • Lay photos over the model and match the camera
  • Adjust heights until the edges line up
  • Optionally get an AI suggestion with your own API key

For the AI suggestion, plan and photos go straight from your browser to the provider you choose, that is Anthropic, OpenAI or Google. The provider bills you directly. The ES-Sound server sees neither your key nor your images. Still, check the result, because it is only a suggestion.

Stage, seating and checks

You can also plan the stage and seating in the model. The tool lays out rows, tables or standing areas following the German model assembly-venue code. Then it checks the hall with one click:

  • Exits and capacity with the walking distance to the nearest exit
  • View of the stage as a colour map, plus the view from any seat
  • Reverberation time with a suggestion for drapes
  • Load-in route from the gate to the stage and suitable aerial platforms
  • Sun position with shadows through the windows

Finally, you create a venue fact sheet as a PDF. In addition, you share the hall as a 3D link with clients or place it in the room with AR on your phone.

Using the hall 3D model further

With “Open in lighting plot”, the hall arrives as a 3D model in the Lighting & Rigging Planner. If there is no floor plan there yet, it comes along too. You can also save the model as GLB. The format belongs to the glTF family; see Wikipedia: glTF for details.

Your work saves itself automatically in the browser and is part of the project file. Photos, on the other hand, are not stored; they only last for the current session.

Once the hall is done, plan the trusses in the lighting plot. After that, the Lightshow Generator programs a show to music on your rig. You will find more calculators in the Stagetab.

Nach oben scrollen